YAMAHA YZF R1M ECU FLASH INSTALL
YAMAHA YZF R1M ECU FLASH FULL
YAMAHA YZF R1M ECU FLASH PLUS
YAMAHA YZF R1M ECU FLASH FREE

But you could use the OEM one if you want. I found the white wire on the left side of the fuel tank (Thanks ATL) that supposedly moves it from superbike to superstock mode, however that's the wire that controls the velocity stack motor it looks like.ĭoes that mean that the velocity stacks are disabled when you run in superstock mode? Seems odd. It does include a different mount though, I'm assuming for weight savings. I assume writing is the same but i'm not clear on that yet. You can read the ECU with the ignition on or battery power supplied. The bench flashing harness comes with a 12v plug that should be wired into a 12v power supply and needs to be used in conjunction with the Woolich Racing Log Box D-CAN Interface. There's a plug with 15 pins instead of 10 that is similar in color near the rectifier behind the right fairing, but the plug doesn't go there. The bench flashing harness allows you to flash 2020-2023 Yamaha YZF-R1, 2022+ MT-+ MT-09 ECU's on the bench. I've pulled apart the airbox, velocity stacks, everything that I can find and I still don't know where 14B-86173-70 goes. RSI ECU-Tuning für Kawasaki, Honda, Yamaha, Suzuki, Aprilia, BMW, Ducati.

Maybe it disables the smog pump or tilt sensor? The flash makes a huge improvement over stock, but it is far from perfect. I reset my PCV to a base map and turned back on my auto tuner. I just sent my ECU back to SBU for a reflash with their newer settings. The only thing that I can see is that it removes the neutral light (which i find useful). I had SBU flash my ECU and I have a PCV with Auto tuner. Leave the dongle in place and you will only have to plug it in each time you run the YEC ECU.lġ4B-86172-70 connects to the fuel pump relay in the tail. Once you do this, you can plug into the race ECU and begin talking to it.

I used vampire taps, but you over achievers will solder them in. It also allows for the modification of parameters that are not otherwise adjustable through other tuning solutions, such as electronic throttle mapping. I tapped into the RED power wire on the smaller connector going into the ECU and for the ground i tapped into the a white connector near the ECU that has a set of 6 ground wires in it. We will give your bike an additional 15-18 rear wheel horsepower and remove all throttle and timing restrictions on the bike from the factory that US model YZF-R1 models have.

YAMAHA YZF R1M ECU FLASH FREE

We can return the ECU to stock if needed, free of charge. You can either A) run an extended wire to the battery or B) tap into the power and ground at the ECU connection. This is the same ECU flash we use on our championship-winning YZF-R1 race bikes. The cable is very short and intended to connect to the battery because the race ECU mounts in the tail section.

YAMAHA YZF R1M ECU FLASH INSTALL

Simple and easy to install and Brian video install made it even easier. There is a white connector that has a red power wire and black ground wire. This is a must have for any any bike period. Part 13S-8533A-70 does indeed attach to the USB programming dongle. Kind of looks like a top speed, but not really sure what that is. The new ECU removes the speedo, but the fans do work and there's a number above that is also recorded (58) was my number. To install, simply remove the left side panel and it clips in place nicely. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.ECU is plug n play with the stock unit. Your ECU is located on the left hand (clutch) side of the bike. This is not to be confused with presets A.

YAMAHA YZF R1M ECU FLASH FULL

With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. Our 2015-18 YZF-R1 ECU Flash features 4 custom full power throttle and ignition maps integrated into Power modes 1-4. We believe everyone deserves the same tuning technology that until now was reserved for factory riders. Bike-side programming harness to permanently install on your bike.High Load Fuel Maps (with PC3 and PC5 map importing).More power/torque through the range, better throttle improved acceleration.

YAMAHA YZF R1M ECU FLASH PLUS

This Interface allows you to easily adjust the following! Increase power of your 15 plus YZF-R1 with our custom ECU re-map/Dynot Tune. FLASH TUNE FLASHTUNE ECU PROGRAMMER TUNING KIT BIKE SIDE TYPE 2

Yamaha yzf r1m ecu flash